SGS IMPLANTS

P1D Dental Implant

DENSE THREAD GEOMETRY

Closely spaced threads developed for higher-density bone.

CONICAL CONNECTION

SGS Conical Platform implant–abutment interface.

PLATFORM SWITCHING

An inward-positioned restorative interface relative to the implant shoulder.

SBTC SURFACE

SGS surface treatment technology applied to the implant body.

Why P1D?

A dedicated approach to dense bone
–

Dense cortical bone presents different surgical demands from softer bone. In D1 and D2 conditions, implant macrogeometry and osteotomy preparation must be considered together to establish appropriate primary stability while limiting excessive compression of the surrounding bone.

The SGS P1D is designed with these conditions in mind. Its closely spaced thread configuration makes it a dedicated option within the SGS portfolio for clinicians working in higher-density bone, particularly mandibular sites.

Implant selection should always reflect the available anatomy, bone quality, planned restoration and the manufacturer’s recommended surgical protocol.

IMPLANT DESIGN

Thread geometry and primary stability
–

The P1D features a densely threaded design developed for use in hard-bone conditions. Its closely spaced threads are a defining feature of the implant’s macrogeometry and distinguish it from designs intended primarily for lower-density bone.

Primary stability depends on the interaction between implant geometry, bone quality and osteotomy preparation. In dense bone, achieving the highest possible insertion torque should not be the objective in itself. Appropriate site preparation is essential to establish mechanical stability without unnecessarily compressing the surrounding bone.

The drilling sequence should therefore follow the current P1D surgical protocol, with clinical judgement applied to the individual site.

CONNECTION & SURFACE

RESTORATIVE INTERFACE

SGS Conical Platform
–

The P1D uses the SGS Conical Platform implant–abutment connection, incorporating a platform-switching configuration.

The restorative interface is positioned inward relative to the implant shoulder. Prosthetic planning should take account of the connection type and the compatible restorative components specified for the system.

SURFACE TECHNOLOGY

SGS SBTC Surface
–

P1D incorporates SGS SBTC surface technology, which the manufacturer describes as a structured, hydrophilic surface developed to support the early interaction between the implant surface and blood.

Surface characteristics are one aspect of implant design. Healing and long-term clinical outcomes also depend on patient-related factors, surgical technique and restorative management.

PRODUCT SPECIFICATIONS

P1D Implant Dimensions

The P1D range includes four implant diameters and lengths from 6 mm to 16 mm. Availability varies by diameter, with the 6 mm length offered only in the Ø 5.0 mm configuration.

Length Ø 3.5 mm Ø 3.75 mm Ø 4.2 mm Ø 5.0 mm
6 mm – – – ✓
8 mm ✓ ✓ ✓ ✓
10 mm ✓ ✓ ✓ ✓
11.5 mm ✓ ✓ ✓ ✓
13 mm ✓ ✓ ✓ ✓
16 mm ✓ ✓ ✓ ✓

Dimensions are based on the SGS Product Overview 2025 and manufacturer product information. UK stock availability should be confirmed before ordering.

Clinical considerations for P1D placement

SURGICAL PLANNING

Implant selection in dense bone requires careful assessment of the available bone volume, cortical thickness, anatomical structures and planned prosthetic outcome. The implant’s macrogeometry should be considered alongside the drilling protocol rather than independently of it.

Osteotomy preparation
–

In D1 and D2 bone, adequate site preparation is particularly important. Excessive insertion torque is not necessarily desirable, and the surgical sequence should follow the manufacturer’s recommendations for the selected implant dimensions and clinical conditions.

Primary stability and loading
–

Primary stability should be assessed at the time of placement. Although the manufacturer identifies immediate loading as a potential application, this should not be interpreted as an automatic indication. Loading decisions must account for the achieved stability, implant position, occlusal conditions and prosthetic design.

Restorative planning
–

The planned restoration and compatible SGS Conical Platform components should be considered before surgery, particularly where restorative space or prosthetic angulation may influence treatment planning.

Clinical information on this page is intended for qualified dental professionals and does not replace the current manufacturer instructions for use or surgical protocol.

Resources and support

PROFESSIONAL RESOURCES

Technical information when you need it

Access the information required to evaluate the P1D system,
plan treatment and identify compatible surgical and restorative components.

Surgical Protocol

Review the manufacturer’s implant-specific drilling and placement recommendations.

Request →

Prosthetic Components

Explore compatible prosthetic components for the SGS Conical Platform.

Explore →

Technical Support

Contact the SGS UK team for product information, component compatibility and professional enquiries.

Contact Us →

Frequently asked questions about P1D

Is P1D designed for hard bone?

Yes. SGS specifically describes P1D as a densely threaded implant developed for hard-bone conditions, particularly mandibular D1 and D2 bone.

Can P1D be used in other bone types?

The manufacturer’s published positioning emphasises hard-bone applications. Suitability in other clinical situations should not be assumed from this description alone and requires assessment of the relevant instructions, surgical protocol and clinical circumstances.

What connection does P1D use?

P1D uses the SGS Conical Platform and incorporates platform switching.

What diameters are available?

P1D is listed in 3.5, 3.75, 4.2 and 5.0 mm diameters.

What lengths are available?

Lengths of 8, 10, 11.5, 13 and 16 mm are listed across all four diameters. A 6 mm length is also listed for the 5.0 mm diameter.

Does P1D use the SBTC surface?

Yes. P1D uses SGS’s SBTC surface technology.

Can P1D be immediately loaded?

SGS includes immediate loading among the system’s possible applications. Whether it is appropriate depends on the individual clinical and restorative circumstances.

Does P1D use the same prosthetic components as P7N?

No. P1D uses the SGS Conical Platform, while P7N uses a separate Narrow Conical Platform. The two require their respective compatible restorative components.

Explore P1D with SGS Dental UK

Considering P1D for your practice?

Explore the available dimensions, review the restorative options or contact our team for product and technical information.

Considering P1D for your practice?

Explore the P1D system with the SGS UK team.
We can help you understand the available configurations, compatible components and technical resources.